Seco

The tripod stabilizer is designed to provide the extra stability required when working indoors on concrete and other hard surfaces.

1 meter Carbon Fiber Pole

The Claw™ is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it.

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole.

Allows adjustment of the prism height by moving the threaded brass insert in the adapter.

Original Heads-Up Rod Level

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole.

This compact and precise right angle prism allows for easy determination of right angle points or rectangular points between two targets.

The original Open Clamp Pole Bracket and Cradle technology designed by SECO. These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods.

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole.

Open Clamp With Compass & 40-min Vial Bracket System

Designed to hold 24 inch (61 cm) stakes or rebar with a center partition. Main compartment of this bag is constructed of tough Rhinotek™ material.

12-ft (3.7 m) Range Pole with three 4-foot sections.

Tripod accommodates 5/8 x 11 instruments and are designed for all types of jobs. The telescopic Aluminum (Round) legs allow for setup.

Options: 10ths, Inches & Metric

Made of heavy-duty water resistant polyester and Rhinotek™. Measures 27 x 11 x 11 inches (69 x 28 x 28 cm).

The Claw™ is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it.

The Claw™ is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it.

Center Punch Point fits all poles or products with male 5/8 x 11 threads.

A convenient tool for adjusting and calibrating prism pole vials.

Comes with an on-board 40-minute vial. Aluminum

Prism Holder with a -30 mm, -40 mm offset.

Open Clamp Plain Bracket System

This heavy-duty bag will carry many different brands of tripods, including SECO and Crain Tri-Max

Open Clamp Plain for 1.5 inch O.D Pole

These Claw™ clamps are also made of durable anodized aluminum. The Claw technology allows maximum tightening without crushing.

25 mm L-Bar Mini Prism

The new telescopic aluminum builders rod is made of a light and durable alloy. The sections are anodized and silkscreened with moisture-resistant ink.

Adapts 3-1/2 x 8 tripod to 5/8 x 11. Constructed from black anodized aluminum.

This system holds a GPS or RTK-type rod to the door of your survey truck for a mobile solution and off-road surveys It’s easy to set up and fits most mid- to full-size pickups and SUVs.

The Seco Handheld Mini Rod has a height of 120 mm (0.394 ft).

This combo allows easy conversions from “control” to “topo” surveys.

Designed to hold 18 inch stakes or rebar with a center partition with the main compartment of the bag being constructed of tough heavy-duty Rhinotek material.

The new telescopic aluminum builders rod is made of a light and durable alloy. The sections are anodized and silkscreened with moisture-resistant ink.

Super Jumbo Padded Bag

The new telescopic aluminum builders rod is made of a light and durable alloy. The sections are anodized and silkscreened with moisture-resistant ink.

Adapts retro prisms to Wild-type tribrachs. Has removable Zeiss plug for adapting prisms to Zeiss tribrach.

Heavy-Duty Lath Bag with Rhinotek material on the bottom and six inches up the sides.

Seco Single Mag Mount with 5/8 x 11 Tip.

Seco Single Mag Mount with Quick Release Anti-Rotation Tip.