Seco

Holds 24 inch (61 cm) wood lath and includes a Rhinotek bottom.

Designed to carry a prism pole with the tripod attached. The bag has a fold-over flap and is made from nylon Cordura and durable Rhinotek.

Seco GPS Quick-Disconnect Adapter

Heavily padded with extra height for vertical triple prism assemblies.

Heavy-Duty Lath Bag with Rhinotek material on the bottom and six inches up the sides. Designed 36 inches (91.4 cm) deep.

Seco Radio Antenna Bracket Will connect to 19-and 32mm Diameter Poles

The Carbon Fiber pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections.

Heavily padded for Triple Prism Assemblies with extra width and depth for prisms with targets or tribrachs.

The new telescopic aluminum builders rod is made of a light and durable alloy. The sections are anodized and silkscreened with moisture-resistant ink.

Crain CR Series Leveling Rod incorporates many features including a rectangular shape with rounded back corners
Options: 10ths or Inches

The new telescopic aluminum builders rod is made of a light and durable alloy. The sections are anodized and silkscreened with moisture-resistant ink.

The rotatable friction top adapter allows the prism to be pointed after installation in the tribrach.

Adapts 5/8 x 11 tripod to 3-1/2 x 8. Constructed from black anodized aluminum.

For checking and adjusting optical plummet tribrachs in the office. Does not have a level vial.

Aluminum pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections.

Designed to fit the 6341-00 Tilting Triple Prism Assembly

Stay hydrated on the job while maintaining workplace safety!

Tripod Bracket Fixed Position for Allegro or Jett Ce

1-1/4" (32mm) diameter. Threads into bottom of prism pole.

1.0 Meter GPS Range Pole

The convenient nylon Cordura rod case has a reinforced bottom, a front pocket for a sensor bracket and a shoulder strap.

The Carbon Fiber pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections.

Heavily Padded for Triple Prism Assemblies.

Heavily Padded for Single Prism Assemblies.

Plan holder hangs on the back or front of any vehicle seat.

Seco GPS Rover Rod Carrying Case Orange

Holds most of Seco's prism poles and laser grade rods.

This SECO 32 oz plumb bob is precision-machined from solid brass

Padded carrying case for tribrachs. Has a heavy-duty zipper, dust flaps and nylon carrying straps.

1-1/4" (32mm) diameter. Threads into bottom of prism pole.

50 Centimeter GPS Range Pole

6 inch (15.2mm) Pole

Wide base prism pole topo shoe. 2.5 inches (64mm) diameter steel body

Seco 50cm pole

1-1/4" (32mm) diameter. Threads into bottom of prism pole.

These tin shiners are 1-5/16" (33mm) diameter with raised 1-1/8" (29mm) centers with crimped edges.

All Brass Plumb Bobs with a replaceable steel tip.

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm.

The 3/16-inch spring steel, 14-inch pins are powder-painted red and white, alternating at each inch.

GPS Quick Release Tip

The Snap-Tite® Rod Level Fits the CR series rounded oval rods.

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm.